Standard Spiral Wound Gasket

Standard Spiral Wound Gasket:

spiral wound gasket is manufactured by spirally winding a preformed metal strip and a filler on the outer periphery of metal winding andrels. The winding mandrel outside diameter forms the inner diameter of the gasket and the superposed metal and non-metallic windings are continually wound until the required outer diameter is attained.

Type – R Basic construciton
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.

With Inner Ring Type – IR
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion. Damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. Suitable for male and female pipe flanges

With Outer Ring Type – CG

Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion. Damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. Suitable for male and female pipe flanges

With Outer Ring and Inner Ring Type – CGI

A inner ring & outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosion on flange faces at annular space. Suitable for used with flat face and raised face flanges and specified for high pressure temperature service class 900 and above or other situations

Specifications

Products are manufactured in accordance with all relevant gasket standards to suit flange designations: ASME B 16.20, MSS SP-44, API 605, DIN 2632-2638 DIN EN1514-2, JIS B2404, BS EN1514-2 , etc.

AVAIABLE GASKET MATERIAL